THE WHOLE STRUCTURE OF THE PRESS BRAKE

• Totally European design, streamlined looking
• Taking off inner-stress of welded parts by tempering, good stability
• Remove rust with sand-blast and coated with anti-rust paint
• Adopt Spanish pentahedron machine center, once clamping can finish all working surfaces which will
• guarantee dimension precision and position precision.
• The design of the machine frame is a critical part of any machine with relation to its ability to produce accurate parts for a long period of time.
• Frames, assembly surfaces and connection holes are machined after the welding process, up to 60′ in a single pass.
• Supplying three front sheet supports , Finish of Nippon Polyurethane paint.

RAM STRUCTURE

• Upper stroke design for bending, low noise, stable operating situation , Parallel tolerance of Y1 and Y2 is 0.01mm
• Y1,Y2 can be programmed separately can work under non-balance load, can bend cone-shape work piece
• At bottom dead center a pressure-keeping time is offered, and can be programmed to assure precision of all kinds of work piece. Can move the ram up slowly,
• which allows the operator to control work piece conveniently Universal fixing-surface of the upper tool can be meeting with the clamping requirement of the tool farthest！

1-Nominal force:1750KN
2-Bending length:3200mm
3-Distance between:2750mm
4-Throat:410mm
5-Stroke:200 mm
6-Max open height:420 mm
7-X,Y axis travelrepeat positioning accuracy: ±0.01mm
8-Approach speed:160 mm/s
9-Working speed:120mm/s
10-Backing speed:160 mm/s
11-Control axis8+1 -AXIS for Y1 , Y2 , X1,X2, R1,R2,Z1,Z2 ,-axis and v crowning axis

12-Dimension:3550x1700x2700mm Removable
13-Electrics220V/60Hz/3Ph Optional
14-Moto:r11 Kw